Navigation

Please note: This is a demo version and only the dark grey sections are available.

• 1.1 HSPA+ in the HSPA Road map – parallel to LTE
• 1.2 Feature Review of HSDPA
  • 1.2.1 Release 5 HSDPA Feature Summary
  • 1.2.2 Release 6 HSDPA Feature Summar
  • 1.2.3 Release 7 HSDPA Feature Summary
• 1.3 Key Technology for HSPA+, LTE and WiMAX: Hybrid Automatic Repeat Request – based on 1/3 Turbo Coding
• 1.3 Key Technology for HSPA+, LTE and WiMAX: Hybrid Automatic Repeat Request – based on 1/3 Turbo Coding (continued)
• 1.4 HSDPA Spreading and Modulation
• 1.5 HSDPA Category Table from Rel. 5 – Rel. 7
  • 1.5.1 The Beast of Burden @ Uu: Hybrid ARQ with N-Stop & Wait Processes
  • 1.5.2 HSDPA Resource Allocation and Timing Relations
• 1.6 Feature Review of HSUPA
  • 1.6.1 HSUPA Feature Summary of Rel. 6
  • 1.6.3 Serving Grant controlling UE’s uplink Throughput
    • 1.6.3.1 Serving Grant Table 1 (Rel. 6) vs. E-TFCI Selection
    • 1.6.3.2 Serving Grant Table 2 (Rel. 7)
• 1.7 HSUPA Feature Summary (Rel. 7)
  • 1.7.5 Example of HSUPA Category 7 UE with Multi-Code Operation
  • 1.7.6 HSUPA Categories Rel.6 and Rel. 7
• 1.8 HSPA+ Protocol Stack
  • 1.8.1 HSUPA Protocol Stack Details
  • 1.8.2 HSDPA Protocol Stack Details
• 2.1 Higher Order Modulation Schemes
  • 2.1.1 Modulation Scheme Overview
• 2.2 MIMO in HSDPA+
  • 2.2.1 MIMO Feedback Procedure (PCI)
• 2.2 MIMO in HSDPA+
  • 2.2.1 MIMO Feedback Procedure (PCI) (continued)
  • 2.2.2 Spatial Precoding Details
  • 2.2.3 MIMO Performance
    • 2.2.3.1 MIMO Performance on Link Level
• 2.3 Continuous Packet Connectivity (CPC)
  • 2.3.4 HS-SCCH-less Operation Details (Rel. 7 onwards)
• 2.4 Continuous Packet Connectivity (CPC)
  • 2.4.1 Basics of DTX in Uplink for E-DCH only
  • 2.4.2 Example: Uplink DPCCH Burst Pattern for 10 ms E-DCH TTI
  • 2.4.4 Example of simultaneous Uplink DTX and Downlink DRX
  • 2.4.5 CPC and Enhanced F-DPCH
  • 2.4.5 CPC and Enhanced F-DPCH (continued)
• 2.5 Upgraded L1 Signaling
  • 2.5.1 Legacy HS-SCCH Frame Structure (R5 & R6)
    • 2.5.1.1 HS-SCCH Part 1 and 2 Forward Error Coding Chain
    • 2.5.1.2 UE specific masking of Part 1 and Part 2
  • 2.5.2 HS-SCCH of Rel. 7
    • 2.5.2.1 HS-SCCH Overview of Rel. 7
• 2.6 Downlink MAC-ehs, flexible RLC-AM & RRC State Improvements
  • 2.6.4 MAC-ehs Protocol Block Structure
    • 2.6.4.1 UTRAN side MAC-ehs Details
    • 2.6.4.2 UE side MAC-ehs Details
    • 2.6.4.3 Practical Exercise: MAC-hs contra MAC-ehs
  • 2.6.5 Flexible RLC-AM PDU Sizes
    • 2.6.5.1 Comparison of RLC-AM between Rel. 6 and Rel. 7
• 2.7 Practical Exercise: Work out the differences between HSDPA and HSUPA!
• 2.8 RRC State Operation Enhancements
  • 2.8.1 Operation of UTRA RRC States in Release 7
• 3.1 L1 Signaling of MIMO and 64-QAM
  • 3.1.1 Modulation Schemes and TB Sizes
• 3.2 Dual Branch Interference Cancellation
  • 3.2.1 Categorization of Advanced Receivers
• 3.3 Important Rel. 8 HSPA+ Features
• 4.1 HS-DSCH Reception in CELL_FACH and XXX_PCH
  • 4.1.1 Overview of various RRC States with HS-DSCH support
• 4.2 HS-DSCH Operation in CELL_FACH state
  • 4.2.3 HS-DSCH Operation in CELL_FACH state – Cell Update
• 4.3 RRC Idle to transient CELL_FACH – Reception of HS-DSCH
• 4.4 peration in the URA_PCH or CELL_PCH state
  • 4.4.1 Data Transfer in CELL_PCH with dH-RNTI
  • 4.4.2 State Transition from CELL_PCH to CELL_FACH to CELL_DCH
  • 4.4.3 CELL_PCH and URA_PCH enhanced Paging Procedure